Three out of ten engines run on stolen fuel. How did Neotecnik decide to stop this problem?
Track and digitize sales force operations
Program and manage all fleet maintenance and generate budgets without the need for additional personnel
Discover the top 20 solutions and tools for tracking, security, and end customers
Discover how a virtual copilot in MDT terminals meets safety regulations and optimizes operations
How efficient cold chain control drastically reduces losses and damages to goods?
One of the most critical activities in logistics management is asset control...
Three out of ten engines run on stolen fuel. How did Neotecnik decide to stop this problem?
With the right tools and guidance, migration represents an improvement in the service you provide to your customers and strengthens your position against the competition
The ST4505 vehicle tracker is a fleet management solution that needs to monitor the location, speed, and other available codes in the OBD port of the vehicles. It offers a plug and play automatic installation and provides information such as RPM, calculated load value, coolant temperature, fuel system status, vehicle speed, VIN, etc. It supports 4G LTE Cat-M1/NB-IoT with 2G backup. The ST4505 is a low-cost tracking solution that connects to the OBD II diagnostic port, commonly located near the driver's knees or under the steering column. Once connected to the OBD II port, the ST4505 starts tracking and monitoring diagnostic information about the vehicle. There are also other versions of this device that incorporate Bluetooth or are lower cost and do not include OBDII stack information.
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Suntech | ST4505 | GPS | Yes - Internal Battery | TCP/ UDP/ SMS |
- Red: LTE Cat M1/NB-IoT/2G.
- Automatically detects OBD-u2161 protocol.
- Reads extensive engine diagnostics (user-selectable), DTC, and vehicle ID.
- Collects information quickly and accurately and notifies the user.
- Configurable report format.
- Multiple Mode and Condition Report.
- Easy pre-configuration for report mode.
- DPA (Driving Pattern Analysis) / CR (Accident Reconstruction).
- Plug & Play
| Network Frequency | LTE Cat M1/NB-IoT/2G |
| GPRS | Multi-slot Class 12 |
| Transmission Protocol | TCP/UDP |
| Command / Report sent by SMS | MT/MO PDU/text mode, SMS over SG/NAS |
| Backup Server | Compatible (via dual IP) |
| Settings Mode | By PC, GPRS, or SMS |
| GPS/Glonass Sensitivity | Tracking -167 dBm |
| Reacquisition -161 dBm | |
| Cold Start -149 dBm | |
| Protocols | J1850 Protocols (PWM or VPW) |
| ISO9141-2 and ISO14230, K-line | |
| ISO14230-4 2000 Keyword Protocol | |
| ISO 15765-4 (CAN) Protocols | |
| Size | 74 (length) × 46 (width) × 25 (depth) mm |
| Weight | 71 g (with backup battery) |
| Power Supply | DC 8 V ~ 33 V, main power +/- reverse protection |
| Power Consumption | Active Mode: 120~130mA @12V |
| Sleep Mode: approx. 4mA at 12V | |
| Deep Sleep Mode: approx. 2mA at 12V | |
| Antenna Type | Internal GPRS Antenna, Internal GPS Antenna |
| Motion Detection | Built-in 3-axis Accelerometer and 3-axis Gyroscope |
| Data Storage | up to 2000 locations, for coverage loss scenario |
| Backup Battery | 3.7V 350mAh rechargeable lithium-ion battery |
| Electrical Protection | ESD and Overvoltage Protection |
| Operating Temperature Range | -40u02daC ~ +80u02daC |
| Certificates | FCC, PTCRB, CI, ISO 7637-2, ISO 7637-3, ISO 10605, CISPR25 |