St300p Suntech

ST300P The ST300P device is the ideal device for passenger counting, as it can accommodate up to two bidirectional counters, which detect people boarding and alighting. It also has various alerts, such as driving quality, as thanks to its motion sensor, it can receive alerts for sudden acceleration, sudden braking, excessive speed or high-speed turns, and thus create a profile and rate the driver. With this equipment, you can also have a panic button, immobilization, jamming detection, and this model also has an RS232 port, with which you can use multiple accessories.

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Suntech ST300P Rastreador de Vehículos Si Yes - Internal Battery GPRS / SMS

Features

  • Wide range of power supply: 8VDC to 40VDC
  • Low battery consumption. Typical 40-50 mAh Ni-MH
  • Electronic protection: Against ESD, Overvoltage and reverse power supply
  • Multiple interfaces: 1 IGN, 1 Digital input, 2 Digital outputs, 2 RS-232(Rx/Tx), 1 11V power output
  • Super compact size: 90.2 x 58 x 26.2 mm, Weight 63g
  • Temperature range: 30°C + 80°C
  • Driving Pattern Analysis (DPA): Hard braking, Acceleration, Turning, Histogram and more
  • OTA (Over The Air) support: Configuration and firmware update
  • Jamming detection: Activate output after certain distance or time from detection
  • Geofences: 200 circular, 50 polygonal and 500 point geofences for route deviations
  • Easy installation of virtual ignition: By movement or battery voltage
  • Reports: By time, distance and change of direction
  • Alerts and Emergencies: Speed, Geofences, Battery connection/disconnection, Anti-theft, Battery error, Idle and more
  • 3-axis acceleration: Crane alert, shocks, collisions and more.
  • Sequential report: FIIFO or LIFO type
  • Protocols: SCII, Binary
  • Certifications: FCC, CE, RoHs, GCF, NYCE and ANATEL

 

 

ST300P

Requirements

See the complete documentation
ST300P

Programming

See the complete documentation
ST300P

SMS Programming

See the complete documentation
ST300P

Commands

See the complete documentation