Accelerometer: 3-axis accelerometer (Driving Pattern Analysis (DPA), crash and collision alert)
Connections: 10-pin cable connector / 4-pin cable connector (Voice kit)
LED Indicator: 3G network and GPS status
Cellular & GPS Antenna: Both Internal
M2M Communications: Suntech unified protocol
Inputs and Outputs: 1-wire / RS232 / IGN / 1 digital input / 2 digital outputs / Bidirectional voice communication / External power 4.5V
Communication: TCP, UDP, SMS
Geofences: 255 circular, 30 polygonal
Other Features: Jammer detection, Fine Tracking, Scuti, ST20U or ST25T support
SIM CARD Size: DC 8V~33V Overvoltage and reverse power protection
Backup Battery: Rechargeable 3.7V, 450 mAh Ni-MH
Battery Consumption: Typical: 40~50 mA@ 12V / Sleep: Less than 4mA@ 12V / Deep Sleep: Less than 2mA @12V
Temperature Range: -30°C~+85°C
Weight: 115 g (with backup battery)
Reception: GPS or Glonass / GPS Band L1 (1575.42MHz), Glonass Band L1 (1601.71MHz) SBAS: WAAS, EGNOS, MASA
Accuracy: Position 2.5m CEP / SBAS 2.0m CEP
Acquisition: Cold start <35s / Warm start <30s / Hot start <1s
Sensitivity: Tracking -167dBm / Reacquisition -161dBm / Acquisition -149dBm
Certifications: FCC, IC, PTCRB, NYCE, IFT
The ST3300RP is a telemetry device for vehicle tracking with a serial port for transmission of data from remote terminals and a port for bidirectional calls. It has a 3-axis accelerometer to provide information on DPA (Driving Pattern Analysis), including crash and collision alerts. Among its main features are that it is portable, compatible with LoRa, and with expansion modules.
ES
PT
