Oko navi Oko
Oko-Navi The main purpose of the device is to work as a GPS/GSM tracker to perform transportation logistics tasks, using the mobile operator's GSM network and GPRS/EDGE technology to transmit data to the server. This device can also be used as a GSM car alarm, which transmits an alarm siren of conventional car alarms already established, as well as to remotely block the engine using a mobile phone. In the GPS/GSM tracker, the concept of wireless software changer (SW) is used through GPRS/EDGE technology.

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Oko OKO-NAVI Rastreador de Vehículos IMEI (15 digits) Yes - Internal Battery GSM / GPRS

Features

  • Power supply voltage (12 V nominal) ....................... 7 V ... + 18 V
  • Current consumption with nominal voltage of 12 V:
  • - Standby time .............................................. ........... 60 mA
  • - One data ........................................... 400 mA - in "Invisible" (GSM off, GPS off) .............. 10 mA
  • Number of combined hardware inputs and outputs (excluding outputs)  2 pcs.
  • Maximum voltage applied to control inputs up to 30 V
  • Internal resistance of control inputs ................. 40 ohms
  • Maximum switching DC voltage output
  • Maximum load current of 0.5 A at the output ........................................
  • Maximum total load current on all outputs simultaneously ..............1 A
  • Device operating temperature ....... from -30 ° C to + 80 ° C
  • Automatic GSM module shutdown below -40 ° C, above 85 ° C.
  • Working frequency band 850/900/1800/1900 MHz .......................
  • Total dimensions of the unit (LxWxH) mm .................... 70h50h27
Oko-Navi

Requirements

See the complete documentation
Oko-Navi

Programming

See the complete documentation
Oko-Navi

SMS Programming

See the complete documentation
Oko-Navi

Commands

See the complete documentation

Our Solutions