The LW4G-6E is a 6-wire anti-jammer CAT1 4G GPS tracker, which can perform functions such as engine shutdown, remote fuel/electricity cut-off, SOS alarm, driving behavior data analysis reports, collision alarm, etc. The device has 3 data channels to the platform. It can meet the monitoring needs of commercial vehicles, online car monitoring, car rental service, car rental, logistics and other related scenarios. In addition, the device integrates a 1-channel analog input AIN, which can upload data such as fuel volume, temperature, pressure, cargo weight, etc. The device also has a 1-wire interface, which can be linked with I-Button to achieve driver identification and vehicle hardware anti-theft functions.
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Lynkworld | LW4G-6E | GPS | 2/1 | Yes - Backup Battery | LTE/GSM |
Product Introduction
Dimensions: 81 (length) x 43 (width) x 14 (thickness) mm
Weight: 48g
Positioning Methods: GPS/LBS
Certification: CE
Product Introduction
Positioning: Upload positioning information, such as longitude and latitude.
Information Upload: According to the interval configuration.
Power On/Off State: Each data packet uploaded contains the power-on state.
External Power Cut-off Alarm: When the GPS tracker detects that the external power source is disconnected, the device will report a power cut-off alarm (turn on the backup battery).
Low Power Alarm/Low Battery Alarm: When the GPS tracker detects that the external power is too low, it will report a low power alarm.
Remote Oil/Circuit Cut-off: Send remote commands to remotely turn on/off oil/circuit (relay required).
Shock Alarm: Upload the shock alarm when a car accident occurs (built-in acceleration sensor).
Driver Behavior Alarm: Harsh acceleration, harsh braking, sharp turns (built-in acceleration sensor).
Trailer Alarm: When the ignition is off, the trailer alarm will be uploaded if the front of the vehicle is lifted, and movement occurs.
Geofences: Send geofence data through the platform, generate a geofence alarm when the vehicle enters or exits the area. Supports 10 hardware geofences.
Vibration Alarm: When the ignition is off, if there is vibration, the alarm information is uploaded.
Speeding Alarm: Upload alarm information when the speed exceeds the set value.
Message Buffer: Positioning data will be stored in the buffer when in network blind spots, and the data will be uploaded later when the tracker connects to the network. Buffer Memory: 5000
Power Saving Mode: Switches to standby mode when the vehicle is stationary.
OTA: Compatible with OTA.
Custom Protocol: Compatible with multiple custom protocols.
DIN: Supports digital signals (such as SOS) or digital-type equipment and peripheral devices.
1-wire: Compatible with 1-wire interface (sensors with 1-wire interface).
AIN: Supports analog or analog-type equipment and peripherals.
Extended Storage: Supported (optional).
Power Supply
External Power Supply: 9-90 VDC
Built-in Backup Battery: Lithium-ion 140mAh
Technology
Technology: LTE-FDD/LTE-TDD, LTE/GSM, LTE/ WCDMA/GSM
Quad-band:
LTE-TDD: B34/B38/B39/B40/B41
LTE-FDD: B1/B3/B5/B8
LTE-FDD: B1/B3/B5/B7/B8/B20
GSM: 900/1800MHz
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66
GSM: 850/900/1800/1900MHz
GSM: Integrated GSM antenna
GPRS Specification: Class 12
Data Route: SMS, platform.
Satellite Positioning
GNSS: GPS, Beidou, Glonass, QZSS
Positioning Accuracy: <2m CEP
GNSS Antenna: 25mm * 25mm * 4mm ceramic antenna
Capture Sensitivity: -148dBm
Hot Start: -156dBm
Reacquisition Sensitivity: -159dBm
Tracking Sensitivity: -167dBm
Positioning Time (Open Sky): Cold Start: 27s; Hot Start: 1s
Operating Environment
Operating Temperature: -40 °C to 85 °C
Storage Temperature: -40 °C to 85 °C
Protection Grade: IP41
Operating Humidity: 5% to 95%
Battery Operating Temperature: -20 °C to 60 °C
Battery Storage Temperature: -20 °C to 45 °C 1 month storage, -20 °C to 35 °C 6 months storage
Bluetooth
Bluetooth: Optional. 4.0+LE. Parameter configuration and compatible peripheral devices.
Hardware Configuration
LED Indicators: GSM, GNSS Indicators
Micro USB: Firmware update and adjustment.
SIM Card Slot: Micro-SIM/E-SIM
Gravity Sensor: Three-axis acceleration sensor.
VCC: 1
GND: 1
DIN: 1
DO: 1
1-wire: 1
AIN: 1
LED Indicator Definitions
Orange (GSM)
Rapid Flashing: GSM is initializing
Slow Flashing: GSM signal is normal
Always On: GPRS is operational
Intermittent: No GSM signal / SIM Card
Blue (GPS)
Rapid Flashing: Searching for GPS signal
Always On: Position captured
No Flashing: GPS inactive/GPS not functioning
ES
PT
