Manufacturer | Model | Type | I/O | Battery | Communication Methods |
---|---|---|---|---|---|
Lynkworld | LW2G-6A | GPS | 3/1 | Yes - Backup Battery | GSM |
Product Introduction
Dimensions: 81 (length) x 43 (width) x 14 (thickness) mm
Weight: 48g
Positioning Methods: GPS/LBS
Certification: CE
Product Introduction
Positioning: Upload positioning information, such as longitude and latitude.
Information Upload: According to the interval configuration.
Power On/Off State: Each uploaded data packet contains the power-on state.
External Power Cut-off Alarm: When the GPS tracker detects that the external power source is disconnected, the device will report a power cut-off alarm (turn on the backup battery).
External Power, Low Voltage Alarm: When the GPS tracker detects that the external voltage is too low, the low voltage alarm will be reported.
Remote Oil/Circuit Cut-off: Send remote commands to remotely turn on/off the oil/circuit (relay required).
Shock Alarm: Upload the shock alarm when a car accident occurs (built-in acceleration sensor).
Driver Behavior Alarm: Harsh acceleration, harsh braking, sharp turns (built-in acceleration sensor).
Trailer Alarm: When the ignition is off, the trailer alarm will be uploaded if the front of the vehicle is lifted, and movement occurs.
Geofences: Send geofence data through the platform, generate a geofence alarm when the vehicle enters or exits the area. Supports 10 hardware geofences.
Vibration Alarm: When the ignition is off, if there is vibration, the alarm information is uploaded.
Speeding Alarm: Upload alarm information when the speed exceeds the set value.
Message Buffer: Positioning data will be stored in the buffer when in network blind spots, and the data will be uploaded later when the tracker connects to the network.
Buffer Memory: 1000
Power Saving Mode: Switches to standby mode when the vehicle is stationary.
OTA: Compatible with OTA.
Custom Protocol: Compatible with multiple custom protocols.
DIN: Supports digital signals (such as SOS) or digital-type equipment and peripheral devices.
AIN: Supports analog or analog-type equipment and peripherals.
Extended Storage: Supported (optional).
Power Supply
External Power Supply: 9-90 VDC
Built-in Backup Battery: Lithium-ion 140mAh
Technology
Technology: LTE/GSM
Quad-band: 850MHz/900MHz/1800MHz/1900MHz
GSM: Integrated GSM antenna
GPRS Specification: Class 12
Data Route: SMS, platform.
Satellite Positioning
GNSS: GPS, Beidou, Glonass, QZSS
Positioning Accuracy: <2m CEP
GNSS Antenna: 25mm * 25mm * 4mm ceramic antenna
Capture Sensitivity: -148dBm
Hot Start: -156dBm
Reacquisition Sensitivity: -159dBm
Tracking Sensitivity: -167dBm
Positioning Time (Open Sky):
Operating Environment
Operating Temperature: -40 °C to 85 °C
Storage Temperature: -40 °C to 85 °C
Protection Grade: IP41
Operating Humidity: 5% to 95%
Battery Operating Temperature: -20 °C to 60 °C
Battery Storage Temperature: -20 °C to 45 °C 1 month storage, -20 °C to 35 °C 6 months storage
Bluetooth
Bluetooth: Optional. 4.0+LE. Parameter configuration and compatible peripheral devices.
Hardware Configuration
LED Indicators: GSM, GNSS Indicators
Micro USB: Firmware update and adjustment.
SIM Card Slot: Micro-SIM/E-SIM
Gravity Sensor: Three-axis acceleration sensor.
VCC: 1
GND: 1
DIN: 2
DO: 1
AIN: 1
LED Indicator Definitions
Orange (GSM)
Rapid Flashing: GSM is initializing
Slow Flashing: GSM signal is normal
Always On: GPRS is operational
Intermittent: No GSM signal / SIM Card
Blue (GPS)
Rapid Flashing: Searching for GPS signal
Always On: Position captured
No Flashing: GPS inactive/GPS not functioning
© 2008-2022 RedGPS. All Rights Reserved.