Digital d485 Strela

Digital-D485 "The fuel level sensors "STRELA" with RS485 serial communication are designed to connect all types of devices that support the same interface (using data transfer protocols such as MODBUS or Omnicomm). Depending on the functional capabilities of your GPS tracker, you can connect 2 or more sensors of this interface. The sensors can be used in vehicle tanks, tractors, and other machines with a nominal onboard voltage of 12 or 24V. Required protocol parameters: up to 19200 bits per second, 8 bits, 1 stop bit. Resolution - up to 65535 points per length. You can customize the sensor and connect it to a PC or laptop to make necessary adjustments with the universal service adapter (USA 2.2)."

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Strela DIGITAL D485 Sensor N/A No - Vehicle Power Supply

Features

 STRELA D485
 Fuel Volume, 0% 0
 Fuel Volume, 100% Adjustable
 Supply Voltage, V 10-30
 Maximum Charging Current, mA 50
 Level Measurement Accuracy, % of length ±0.1
Allowable Additional Error Limits, % Not more than 1.0
Diagnostic Codes Yes
 Temperature Limits, °C -40 - +65
Mean Time Between Failures Not less than 12500 h
Housing Protection  IP66
Electrical Power Consumption, W <0.2
External Sensor Dimensions, mm L x 70 x 70
Continuous Sensor Operation Time Without limitations
Digital-D485

Requirements

See the complete documentation
Digital-D485

Programming

See the complete documentation
Digital-D485

SMS Programming

See the complete documentation
Digital-D485

Commands

See the complete documentation