Manufacturer | Model | Type | I/O | Battery | Communication Methods |
---|---|---|---|---|---|
Microside | X-TRAINERP8 | N/A |
Three-pin jumper. With it, the working voltage is selected, 5V or 3.3V 2
Slide switch: in USB mode, it connects the pins of the microcontroller's USB port (if it has the module) to the micro USB connector of the X-TRAINER. In GPIO mode, it disconnects the pins of the microcontroller's USB port and activates the pins for general use of inputs or outputs, RC4 and RC5.
External power connector, the ranges are between 7V and 12V. It can power even when the cable is connected to the USB port.
Visual indicator LED connected to pin RA1 of any PIC used.
Micro USB type-B connector, with which we can program and/or power our X-TRAINER.
© 2008-2022 RedGPS. All Rights Reserved.