St3300 Suntech

ST3300 The ST3330 is a cost-effective 3G tracking device designed primarily for high-value assets and mobiles such as trailers, containers, trains, and even assets exposed to water such as yachts. The ST3330 is equipped with a sophisticated built-in 3-axis accelerometer that allows it to detect asset movement and transmit an alert report to the server.

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Suntech ST3300 Rastreador de Vehículos 3/3 Yes - Internal Battery

Features

UMTS / GSM 3G network frequency: 800/850/900/1900 / 2100MHz

2G: 850/900/1800 / 1900MHz

TCP / UDP transmission protocol

Configuration mode via USB cable or GPRS or SMS

GPRS Multi-slot Class 12

AT Command GSM 07.07, 07.05

Command /

Report sent via SMS MT / MO PDU / Text mode, SMS over SG / NAS

Compatible backup server (via dual IP)

GPS / Glonass sensitivity tracking -167 dBm

Re-acquisition -161 dBm

Cold start -149 dBm

Event inputs 1 on

3 inputs: available for panic button, door sensor

Event outputs 1 output: Vehicle lock

2 outputs: open drain output up to 300 mA, available for siren

1-wire interface 1-wire (button I, temperature sensor)

1 general serial port RS232, RFID reader (RS232 type)

Housing dimension 90.5 (W) × 58 (L) × 26 (T) mm

Weight 115g (with backup battery)

Power supply DC 8 V ~ 33 V, main power +/- reverse protection

Power consumption Active mode: 70 ~ 80mA @ 12V

Typical (3min. Report): 40 ~ 50 mA at 12 V

Sleep mode: Approx. 4mA @ 12V

Deep sleep mode: Approx. 2mA @ 12V

Motion detection. Built-in 3-axis accelerometer.

Rechargeable backup battery 3.7 V, Ni-MH 450mAh

Electrical protection ESD and overvoltage protection.

Operating temperature range -30 ° C ~ + 80 ° C

Certificates TBD

ST3300

Requirements

See the complete documentation
ST3300

Programming

See the complete documentation
ST3300

SMS Programming

See the complete documentation
ST3300

Commands

See the complete documentation