Specifications
|
|
LTE Specifications
|
|
Operating Bands
|
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 |
|
Data Transmission
|
LTE-FDD: Max 10Mbps (DL)/Max 5Mbps (UL) |
|
EGPRS Specifications
|
|
Dimensions
|
94(L) x 58.5(W) x 21(H)mm |
|
Weight
|
74g |
|
Backup Battery
|
Lithium Polymer, 250 mAh |
|
Operating Voltage
|
8V to 32V DC |
|
Operating Temperature
Storage Temperature
|
-30℃ ~ +70℃
-40℃ ~ +80℃ |
|
BLE
|
Supports BLE 5.2 protocol |
|
GNSS Specifications
|
|
GNSS Type
|
All-in-one u-blox GNSS receiver |
|
Constellation Support
|
GPS,Glonass,Galileo,Beidou |
|
Sensitivity
|
Cold Start: -148 dBm
Hot Start: -160 dBm
Tracking: -167 dBm |
|
Position Accuracy (CEP)
|
Autonomous: < 2m |
|
TTFF (Open Sky)
|
Cold Start: 24 s (avg)
Hot Start: 1 s (avg) |
|
Interfaces
|
|
Digital Inputs
|
1 positive trigger input for ignition detection
3 negative trigger inputs
|
|
Analog Inputs
|
2 analog inputs (0V–16V)
1 analog input (0–30V) |
|
Digital Outputs
|
5 digital outputs |
|
Latched Digital Output
|
1 latched output with internal latching circuit, open drain, max drive current: 150 mA |
|
Serial Port
|
1 RS232 serial port via 22-pin Molex connector for external devices
|
|
Cellular Antenna
|
Internal only |
|
GNSS Antenna
|
Internal |
|
BLE Antenna
|
Internal only |
|
LED Indicators
|
Cellular network, GNSS, power status, CAN status |
|
Mini USB Port
|
For configuration, updates, and debugging |
|
CAN Interface
|
CAN1: Supports CAN-bus for trucks and passenger vehicles
CAN2: Supports CAN-bus on OBD II and J1708 |
|
1-Wire Interface
|
VDD, DATA for 1-Wire devices |
|
Air Interface Protocol
|
|
Transmission Protocols
|
TCP, UDP, SMS |
|
Scheduled Reporting
|
Reports position and status based on preset time intervals, distance, mileage, or combinations |
|
Geo-fences
|
Geo-fence and parking alarm, supports up to 20 internal geo-fence regions |
|
Low Power Alarm
|
Triggered when backup battery is low |
|
Power-On Report
|
Reports when device powers on |
|
Towing Alarm
|
Triggered by towing events while the vehicle is off |
|
Driving Behavior Monitoring
|
Detects aggressive driving, including harsh braking and rapid acceleration |
|
Collision Detection
|
Captures crash data for reconstruction and analysis |
|
Special Alarm
|
Triggered by digital/analog input events |
|
Remote Control
|
OTA control of digital outputs |
