Idp 782 Orbcomm

IDP-782 The IDP-782 is a cellular or dual satellite-cellular communication terminal for vehicle tracking and driver monitoring, enabling text messaging, electronic forms, and more. It is fully programmable and highly functional, offering connectivity for assets with automatic switching between cellular and satellite networks. It offers the best of both worlds: lower data transmission costs in areas with cellular coverage, and always reliable and available communications from the IsatData Pro bidirectional satellite network in remote locations. The backup battery allows for data transmission for up to 12 hours when vehicle power is not available; it is equipped with a 1-Wire interface, CANbus, accelerometer, dual SIM, and sensor ports. The device is also compatible with HSPA/GPRS networks. The IDP-782 terminal supports the development of custom applications for more complex solutions, as well as configurable software applications for simpler implementations and faster time to market.

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Orbcomm IDP-782 GPS 4/2 Yes - Backup Battery GSM/HSPA/GPRS

Features

SATELLITE COMMUNICATION
• Satellite service: Bidirectional, global, IsatData Pro
• Message from mobile: 6,400 bytes
• Message to mobile: 10,000 bytes
• Typical latency: <15 sec, 100 bytes
• Elevation angle: +20° to +90° (external antenna);
-15° to +90° (low elevation external antenna)
• Frequency: Rx: 1525.0 to 1559.0 MHz;
Tx: 1626.5 to 1660.5 MHz
• PIRE:<7.0 dBW

CELLULAR COMMUNICATION
• GPRS frequency: 850/900/1800/1900 MHz
• HSPA frequency: 800/850/900/1900/2100 MHz
• SIM: 3.3V/1.8V SIM
• Security: Detection of intentional GPRS interference (Jamming)

GPS
• Acquisition time: Hot start: 1 sec; Cold start: 27 sec
• Accuracy: 2.5m CEP-Horizontal
• Sensitivity: Acquisition: -148 dBm; Tracking: -159 dBm
• Security: Detection of intentional GPRS interference (Jamming)

EXTERNAL INTERFACES
• Input/output ports: 4 x Configurable analog/digital input/output; 2 x Dedicated outputs (connected to ground).
• Serial ports: 2 x RS-232; 1 x RS-485; 1-CAN bus; 1-Wire
• Accelerometer: 3 Axes

IDP-782

Requirements

See the complete documentation
IDP-782

Programming

See the complete documentation
IDP-782

SMS Programming

See the complete documentation
IDP-782

Commands

See the complete documentation