Three out of ten engines run on stolen fuel. How did Neotecnik decide to stop this problem?
Track and digitize sales force operations
Program and manage all fleet maintenance and generate budgets without the need for additional personnel
Discover the top 20 solutions and tools for tracking, security, and end customers
Discover how a virtual copilot in MDT terminals meets safety regulations and optimizes operations
How efficient cold chain control drastically reduces losses and damages to goods?
One of the most critical activities in logistics management is asset control...
Three out of ten engines run on stolen fuel. How did Neotecnik decide to stop this problem?
With the right tools and guidance, migration represents an improvement in the service you provide to your customers and strengthens your position against the competition
The GV600WG is a globally applicable UMTS/GSM product that complies with the IP67 protocol, specifically designed for heavy-duty vehicles including trailers, tanker trucks, refrigerated trucks, and platform trucks. Its highly resistant and waterproof design ensures that the product remains reliable when installed in the difficult environments commonly encountered in heavy transportation, such as fuel and chemical transportation.
The GV600WG features a large internal battery that can operate for up to three months without external power, making it ideal for trailer tracking even when disconnected. It supports BLE temperature and humidity sensor, BLE keychain, and BLE I/O expander.
In addition, this product has dual power supply source useful when mounted on refrigerated trailers, and the built-in serial interface is designed for integration with refrigeration unit protocols.
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Queclink | GV600WG | GPS | 4/4 | Yes - Internal Battery | TCP/UDP/SMS |
UMTS/HSPA Specifications
| Operating Band | UMTS/HSPA: 850/900/1900/2100 MHz |
| Data Transmission | HSPA: Max 7.2 Mbps (DL) / Max 5.76 Mbps (UL) UMTS: Max 384 Kbps (DL) / Max 384 Kbps (UL) |
GSM Specifications
| Frequency | GSM 850/900/1800/1900 MHz |
| Data Transmission | Supports GPRS multi-slot class 33 Supports EDGE multi-slot class 33 |
GNSS Specifications
| GNSS Receiver Type | u-blox All-in-One GNSS Receiver |
| Sensitivity | Autonomous: -147 dBm Hot Start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.5m |
| TTFF (Clear Sky) | Cold Start: 27s average Warm Start: 27s average Hot Start: 1s average |
General Specifications
| Dimensions | 135 × 62 × 38mm 5.31”(L) × 2.44”(W) × 1.50”(H) |
| Weight | 320g (11.29 oz) |
| Battery | Li-ion, 3.7V, 5800 mAh, 18650 battery pack |
| Battery Life | 120 days, reporting location and online 15 minutes per day |
| Water Resistance | According to IP67 standard |
| Operating Voltage | DC 8V to 32V |
| Operating Temperature | -30°C to +80°C |
| Operating Humidity | 0% to 95% non-condensing |
| Message Buffer | Up to 10,000 messages in the data buffer |
Interfaces
| Digital Inputs | 1 positive digital input for ignition detection |
| Analog Inputs | 1 Analog Input (0V-32V) |
| 1-Wire Interface | Compatible with 1-Wire temperature sensor and iButton driver identifier |
| Power Output | 1 power output (3.3V) |
| Configurable Inputs/Outputs | 4 negative digital inputs for common use, or 4 open-drain outputs with a maximum drive current of 150 mA |
| Serial Port | 1 RS232 port, 1 TTL port |
| GSM Antenna | Internal |
| GNSS Antenna | Internal |
| BLE Antenna | Internal |
| LED Indicator | CEL, GNSS, PWR |
| Connector | Waterproof 18-pin connector |
Communication Protocol
| Transmission Protocol | TCP, UDP, SMS |
| Programmable Reporting | Reports device status and position based on predefined distance parameters, preset time intervals, mileage, or a combination of these. |
| Geofences | Alerts based on geofences; Up to 20 circular and 20 polygonal geofences can be defined |
| Low Battery Alert | Alert when the backup battery is nearly depleted |
| Power-On Report | Reports when the device powers on |
| Special Alerts | Special alerts based on digital/analog inputs, preset speed, and 3-axis internal accelerometer |
| Remote Activation | Ability to remotely control digital outputs |