Manufacturer | Model | Type | I/O | Battery | Communication Methods |
---|---|---|---|---|---|
Queclink | GV600MG | GPS | 4/4 | Yes - Internal Battery | TCP/UDP/SMS |
LTE Specifications
Operating Band | Cat M1/Cat NB1: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28 |
Data Transmission | eMTC (DL) 375 Kbps eMTC (UL) 375 Kbps NB1 (DL) 32 Kbps NB1 (UL) 70 Kbps |
EGPRS Specifications
Frequency | 850 / 900 / 1800 / 1900 MHz |
Data Transmission | GPRS multi-slot class 33 (33 by default) EDGE multi-slot class 33 (33 by default) |
GNSS Specifications
GNSS Receiver Type | u-blox All-in-One GNSS Receiver |
Sensitivity | Autonomous: -147 dBm Hot Start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
Position Accuracy (CEP) | Autonomous: < 2.5m |
TTFF (Clear Sky) | Cold Start: 27s average Warm Start: 27s average Hot Start: 1s average |
General Specifications
Dimensions | 138 mm * 66 mm * 38 mm 5.43" (L) * 2.60" (W) * 1.50" (H) |
Weight | 320g (11.29 oz) |
Battery | Li-ion, 3.7V, 5800 mAh, 18650 battery pack |
Internal G-Sensor | Used for speed alert and motion alert |
Battery Life | 120 days, reports one location online for 15 minutes per day |
Water Resistance | IP67 |
Operating Voltage | DC 8V to 32V |
Operating Temperature | -30℃ to +80℃ |
Charging Temperature | +10℃ to +45℃ |
Operating Humidity | 0% to 95% non-condensing |
BLE (Bluetooth Low Energy) | Supports BLE 4.2 protocol |
Message Buffer | Up to 10,000 messages in the data buffer |
Interfaces
Digital Inputs | 1 positive digital input for ignition detection |
Analog Inputs | 1 analog input (0V-32V) |
1-Wire Interface | Compatible with 1-Wire temperature sensor and iButton driver identifier (up to 8 channels) |
Power Output | 1 power output (3.3V) for external devices |
Digital I/O | 4 negative digital inputs for common use 4 open-drain outputs with a maximum drive current of 150 mA |
Serial Port | 1 RS232 port 1 TTL port |
GSM Antenna | Internal |
GNSS Antenna | Internal |
BLE Antenna | Internal |
LED Indicator | CELL, GNSS, PWR |
Connector | 18-pin waterproof connector |
Communication Protocol
Transmission Protocol | TCP, UDP, SMS |
Programmable Reporting | Reports device status and position based on preset parameters like distance, predefined time intervals, mileage, or a combination of these. |
Geofences | Geofence-based alerts; up to 20 circular and 20 polygonal geofences can be defined |
Low Battery Alert | Alerts when the backup battery is nearly depleted |
Power-On Report | Reports when the device powers on |
Special Alerts | Special alerts based on digital/analog inputs, preset speed, and internal 3-axis accelerometer |
Remote Activation | Ability to control digital outputs remotely |
© 2008-2022 RedGPS. All Rights Reserved.