Galileosky 7x lte Galileosky

Galileosky 7x LTE

Galileosky 7x LTE with external antennas combines the advanced technologies and features of the 7x line: Easy Logic, CAN Scanner, Exigner Driver App, support for two CAN-buses, RS 485, RS 232, Modbus, 1-Wire, Bluetooth with high data transmission speed thanks to LTE and very low power consumption.

LTE: more speed, less power

The Galileosky 7x LTE GPS device establishes connections and transmits data faster with low power consumption. It is guaranteed by the built-in LTE module, NB-IoT (LTE Cat NB1) and LTE-M (LTE Cat M1) standards, with an alternative 2G network. If there is no LTE, the device connects to GSM without delay.

Galileosky 7x LTE allows you to create advanced GPS monitoring solutions for intelligent fleet management in regions where LTE is becoming the main communication network or is expected to be in the near future.

Combines cutting-edge technologies

Galileosky 7x LTE has maximum functionality:

    t
  • Create flexible scenarios, thanks to Easy Logic technology;
  • t
  • Get CAN data from any vehicle with the CAN Scanner tool;
  • t
  • Connect to Exigner Driver App offline to view vehicle parameters;
  • t
  • Use the Eco Driving function with feedback on violations.

Achieve maximum performance

The LTE device has the key advantages of the 7x line: supports two CAN-buses, connects to external devices via RS 485, RS 232, 1-Wire and has 6 inputs and 4 outputs.

Galileosky 7x LTE can receive data from Bluetooth sensors and transmit them to the server. Such wireless sensors as FLS, temperature, humidity, lighting, tilt angle, tags, and others can be used. In addition, the GPS device can have external sensors connected via the Modbus protocol and allows for flexible configurations and data transfer to any server.

Improved possibilities of use

Galileosky 7x LTE processes even the lowest level of sensor signal without connecting external resistors thanks to the built-in resistance with + 2.7V power supply at the inputs. In addition, it has a higher output current of up to 200 mA to connect even more sensors.

Galileosky 7x LTE can connect to any server without being tied to the Galileosky protocol, add files to the ZIP archive to reduce mobile traffic, and work with external sources of coordinate determination, for example, NMEA. In addition, the device supports up to 3500 polygonal geofences and the data loading function per second.

The device has a slot for an external SD card with a capacity of up to 512 GB, a slot for two nano-SIM cards, and a USB 2.0 output for configuring and charging the device without any external power source. Unlike other models in the 7x line, the Galileosky 7x LTE does not have voice communication function.

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Galileosky Galileosky 7x LTE GPS 6/4 Yes - Internal Battery GPRS / SMS / LTE Cat M1 / LTE Cat NB1

Features

GLONASS/GPS Module Yes
Iridium Satellite Module No
Bluetooth Module Yes
GSM Modem 2G 850/900/1800/1900; LTE 700/750/800/850/900/1700/1800/1900
Antenna Type (GLONASS/GPS, GSM) External
Data Transmission Channel GPRS / SMS / LTE Cat M1 / LTE Cat NB1
Cold Start Time 26
Hot Start Time 1
Coordinate Determination Accuracy, not worse 5 m
2G Support Yes
3G Support No
Wi-Fi Support No
Internal Memory Size (MB) 4
Maximum Number of Points in Internal Memory 170000
External Memory Size (GB) 512
Number of SIM Card Slots 2
Micro-SD Card Input Yes
Possibility of Installing SIM Chip Yes
PC Communication Interface USB 2.0
Digital Interfaces 2 CAN, RS 485, RS 232, 1-Wire
Galileosky 7x LTE

Requirements

See the complete documentation
Galileosky 7x LTE

Programming

See the complete documentation
Galileosky 7x LTE

SMS Programming

See the complete documentation
Galileosky 7x LTE

Commands

See the complete documentation