Fmc130 Teltonika

FMC130 The FMC130 is a GPS tracker that supports 4G LTE network coverage and is a perfect choice for fleet management solutions in delivery services, sharing and rental of vehicles, insurance, emergency services, and many other sectors. It includes 3G (UMTS), 2G (GSM) backup compatibility. It comes equipped with internal GNSS, LTE antennas, configurable digital/analog/negative inputs and impulse, three DOUT outputs, Bluetooth connectivity, and backup battery. The FMC130 features a negative input that allows you to save integration time by connecting accessories such as vehicle door sensors, alarm buttons, seatbelt detection, and other similar sensors or accessories. In addition, impulse input can be enabled for accurate reading of fuel flow meter data. Impulse-based fuel usage monitoring is much more accurate compared to certain fuel measurement sensors. The FMC130 is a good solution for high fuel consumption machines such as cranes, construction vehicles, mining machines, agricultural equipment, etc. The programmable inputs, 3 different configurable DOUT scenarios (immobilizer, buzzer, alarm lights, door lock, and other scenarios) along with 4G (LTE Cat 1) compatibility, including 3G (UMTS) and 2G (GSM) backup compatibility, make this a flexible device.

Specifications

Manufacturer Model Type I/O Battery Communication Methods
Teltonika FMC130 GPS 3/3 Yes - Internal Battery LTE Cat 1/UMTS/GSM

Features

MODULE
Name MeiG SLM320-E, MeiG SLM320-LA, Quectel EC21-AU, Quectel EC21-EC, Quectel EC21-KL, Quectel EC21-J, Teltonika TM2500
Technology LTE(CaT1)/3G(UMTS/HSPA)/2G(GSM/GPRS)/GNSS/BLUETOOTH

 

GNSS

GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS
Receiver Tracking: 33
Tracking Sensitivity -165 dBm
Precision < 2.5m CEP
Speed Precision < 0.1 m/s (within +/- 15% error)
Hot start < 1 s
Warm start < 25 s
Cold start

< 35 s

 

POWER SUPPLY
Input Voltage Range 10 - 30 V DC with overvoltage protection
Internal Backup Battery 170 mAh Li-Ion, 3.7 V battery (0.63 Wh)
Internal Fuse 3A, 125V
Power Consumption At 12V < 3 mA (Ultra Deep Sleep)
At 12V < 5 mA (Deep Sleep)
At 12V < 16 mA (Online Deep Sleep)
At 12V < 18 mA (GPS Sleep)
At 12V < 33 mA (nominal without load)
At 12V < 2A Max. (full load)

 

BLUETOOTH

Specification 4.0 + LE
Supported Peripherals Temperature and humidity sensor, OBDII dongle, Inateck barcode scanner, universal BLE sensor compatibility

 

PHYSICAL SPECIFICATIONS

Dimensions 65 x 56.6 x 20.6 mm
Weight 55 g

 

OPERATING ENVIRONMENT

Operating Temperature (without battery) -20 °C to +85 °C
Storage Temperature (without battery) -20 °C to +85 °C
Operating Temperature (with battery) -20 °C to +40 °C
Storage Temperature (with battery) -20 °C to +45 °C
Operating Humidity 5% to 95% non-condensing
Ingress Protection Rating IP41
Battery Charging Temperature 0 °C to +45 °C
Battery Discharging Temperature -20 °C to +60 °C
Battery Storage Temperature -20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months

 

INTERFACE

Digital Inputs 3
Negative Inputs 1 (Digital Input 2)
Pulse Inputs 2 (Digital Input 1, Digital Input 2)
Digital Outputs 3
Analog Inputs 2
CAN Adapter Inputs 1
1-Wire 1
GNSS Antenna High gain internal
Cellular Antenna High gain internal
USB 2.0 Micro-USB
LED Indicators 2 status LED lights
SIM Micro-SIM + eSIM
Memory 128MB internal flash memory

 

FEATURES

Sensors Accelerometer
Scenarios Eco driving, Speeding detection, GNSS fuel counter, DOUT control via call, Excessive idle detection, Disconnection detection, Towing detection, Collision detection, Automatic geofencing, Manual geofencing, Trip, Jamming detection (supported on SLM320-E and SLM320-LA hardware only)
Sleep Modes GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep
Firmware Configuration and Update FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application
SMS Configuration, Events, DOUT control, Debug
GPRS Commands Configuration, DOUT control, Debug
Time Synchronization GNSS, NITZ, NTP
Fuel Monitoring LLS (Analog), LV-CAN200, ALL-CAN300, CAN-CONTROL, OBDII dongle
Ignition Detection Digital Input 1, Accelerometer, external power voltage, engine RPM (CAN adapters, OBDII dongle)
  * Interference detection feature is supported on SLM320-E and SLM320-LA hardware only
FMC130

Requirements

See the complete documentation
FMC130

Programming

See the complete documentation
FMC130

SMS Programming

See the complete documentation
FMC130

Commands

See the complete documentation