"Suntech ST20 is a Can Bus/ELD (Electronic Logging Device) module for fleet management and GPS tracking of mobile assets. With the ST20 Can Bus/ELD (Electronic Logging Device) module from Suntech and a GPS Location Service, you can manage different telematic data that is extracted and sent from the ST20 module to the always online service. The Can Bus/ELD (Electronic Logging Device) module Suntech ST20 is ideal for managing "Driving Control" and improving fleet management, it can detect: vehicle ID number (VIN), vehicle or asset speed, odometer, engine hours, engine revolutions per minute (RPM). The Can Bus/ELD (Electronic Logging Device) module ST20 from Suntech can send data in ASCII text format through the RS232 interface and can be connected to Android-based tablets or smartphones. The installation of the Can Bus/ELD (Electronic Logging Device) module Suntech ST20 is very easy by connecting cables to the Can Bus (J1939/J1708) and also supports deep sleep mode to save energy consumption."
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Suntech | ST20 | Accesorio | N/A | No - Vehicle Power Supply | J1939, J1708 IS015765-4 |
AT compatible command
J1939, J1708, RS232 interface
Connectivity Vehicle data output via RS232
6-pin connector
J1708 +/-
CAN Hi/Lo
Power supply (e.g., +12V/+24V)
Ground
5-pin connector
Output power
Ground
1x Activate (5-pin cable power on/off control or power saving).
RS232, Rx
RS232, Tx
DC power supply 8V~33V, main power +/- reverse protection
Power consumption
Typical: 10mA at 24V
Sleep mode: approx. 1.0mA @ 24V
Housing dimension 53.5 (W) × 56 (L) × 19 (T) mm
Weight 32g (without event cable)
Electrical protection ESD and overvoltage protection
Operating temperature range -30°C ~ +80°C
Certified tests FCC, RoHS
ES
PT
