"The fuel level sensors "STRELA" with analog output are used to connect any trackers that have a voltage input <10V (STRELA with 0-5V output) or 10V> (STRELA with 0-10V output). The sensors can be used in car tanks, tractors, and other machines with a nominal onboard voltage of 12 or 24V. In this type of vehicle, only sensors with a 0-5V output can be used (the special version of 0-7V is also possible). It is not recommended to install "STRELA" sensors with a 0-10V output voltage in vehicles with a 12V onboard voltage."
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Strela | ANALÓGOS (DE 0-5V Y 0-10V) | Sensor | N/A | No - External Power Supply |
| Fuel Volume 0%, V | 0* | 0* |
| Fuel Volume 100%, V | Approximately 5* | Approximately 10* |
| Supply Voltage, V | 10-30 | 10-30 |
| Maximum Charging Current, mA | 100 | 100 |
| Level Measurement Accuracy, % of length | ±0.1 | ±0.1 |
| Allowable Additional Error Limits, % ** | Not more than 1.0 | Not more than 1.0 |
| Diagnostic Codes | Yes | Yes |
| Temperature Limits, °C | -40 - +65 | -40 - +65 |
| Mean Time Between Failures | Not less than 12500 h | Not less than 12500 h |
| Housing Protection | IP66 | IP66 |
| Electrical Power Consumption, W | <0.2 | <0.2 |
| External Sensor Dimensions, mm | L x 70 x 70 | L x 70 x 70 |
| Continuous Sensor Operation Time | Without limitations | Without limitations |
ES
PT
