"Terminal "GLONASS-Navi-2" (GPS) is designed for installation in a vehicle (TC). The location of the vehicle, its speed, and travel direction are recorded. The GPS navigation problem is solved in a global positioning system. In addition, a number of other parameters of the TC are recorded, such as the status of analog/digital inputs and OmniComm sensor, standard connected via RS-232. Only the terminal allows you to control external equipment using the 3 digital outputs through commands via GPRS or SMS. All events and conditions set by the terminal are stored in non-volatile memory. The accumulated data is transmitted through the standard GSM 900/1800 cellular communication network operator, using GPRS data packet technology, to a dedicated server with a static IP address from which it can be obtained via the Internet for further analysis and processing by the operator's board. To ensure reliable communication, the terminal allows you to install two SIM cards from different mobile operators. Only the terminal automatically configures the voice connection. When a terminal is called, it automatically answers and establishes a voice connection, thus giving anyone the opportunity to communicate with the driver or listen to what is happening inside the vehicle. To implement this function, the terminal must be connected to the speaker and microphone. The terminal can be used in any type of vehicle."