Real-time tracking device Tytan®SAT DS540 with CAN-bus GSM / GPRS device designed for real-time tracking of vehicles and cargo or for monitoring technical objects. It is intended for passengers, construction, money transportation, and agricultural vehicles, buses, trucks, etc. DS540 communicates with the server via the GSM network. The device transmits location data (GPS / GLONASS position and speed) with the current parameters and events recorded in monitored objects to an external server using the UDP or TCP protocol. Due to analog / digital inputs and interfaces (RS485, 1 wire), the device: a) measures data from 2 sensors with analog output signal and analog / digital fuel level sensors, b) authorizes access to a vehicle through iButton identifiers, c) measures temperature through 1-wire sensors, d) monitors the status of 2 switches. Due to digital outputs, the device allows users to remotely control 2 circuits. It reads CAN bus data from over 800 passenger cars: fuel level, engine RPM, door / trunk / hood status, remote OEM vehicle locking and unlocking, OEM vehicle alarm activation, etc. DS540 reads from CAN / FMS / J1939 / J1708 Buses among others: fuel level, fuel consumption, engine RPM, engine load and temperature, tachograph data, door / trunk / hood status, remote OEM vehicle locking and unlocking, OEM vehicle alarm activation.
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Tytansat | DS540 | Rastreador de Vehículos | 2/2 | Yes - Internal Battery |
12V / 24V Power Supply (voltage range 8-40V).
Power consumption: average 14-36 mA (depending on transmission interval settings).
Power saving modes: GPS sleep and deep sleep - min. power consumption 1.2mA.
2 analog inputs, operating as 0-10V / 0-30V analog inputs and digital inputs.
2 digital outputs (OC type).
CAN and J1708 bus data readings on over 800 cars and trucks.
Built-in 3-axis accelerometer to detect drive condition without connecting the ignition circuit.
RS485 interface for communication with digital fuel level sensors (Technoton, Eljunga, Omnicomm, Technokom).
1-wire interface: iButton identifiers (Dallas DS1990A) and DS18B20 digital temperature sensors.
List of up to 500 authorized iButton identifiers.
Immobilizer function.
Quad-band GSM / GPRS modem Simcomm SIM800C.
Built-in GPS / GLONASS receiver Tytan Digital Systems GPS / GLONASS 1537 with simultaneous observation of GPS and GLONASS satellites.
Built-in GSM / GPRS modem 850/900/1800/1900 MHz with external GSM antenna.
Built-in GPS / GLONASS / GALILEO / QZSS receiver with active GPS / GLONASS external antenna.
NMEA 0183 v3.01 protocol (GGA, GSA, GSV, RMC, VTG).
High sensitivity: 161dBm.
32-bit Microchip MX7 microcontroller, 512kB Flash ROM, 128kB RAM.
Built-in 4Mb memory for data storage. Capacity: up to 50000 reports.
Remote configuration and firmware updates via GSM / GPRS using FTP protocol.
Two device operation signaling LEDs.
USB port for device configuration and diagnostics.
ES
PT
