The ST3310W is a GPS tracker suitable for a variety of basic tracking applications, such as stolen vehicle recovery, car financing, and more. It features the following characteristics: I/O and 1-Wire interfaces, reliable connectivity (3G and fallback to 2G), driving pattern analysis, accident reconstruction, configurable report formats (UP), virtual ignition, geofences (polygonal and circular), water-resistant (IP67), 1-Wire for temperature sensors and I-button, memory capacity up to 10,000 reports, RF signal inhibitor detection. Installable.
| Manufacturer | Model | Type | I/O | Battery | Communication Methods |
|---|---|---|---|---|---|
| Suntech | ST3310W | GPS | 1/1 | Yes - Internal Battery | UMTS/GSM |
Wireless communication
UMTS / GSM network
GNSS
GPS receiver type, GLONASS
SBAS: WAAS, EGNOS, MASA
Autonomous location accuracy <2.5 m CEP
Update rate 1Hz
Cold start (TTFF) <35 s
Hot start (TTFF) <30 s
Warm start (TTFF) <1 s
Tracking sensitivity -167dBm
Reacquisition -161dBm
Acquisition -149dBm
Physical
Dimension 94 (L) x 55 (W) x 23 (T) mm
Weight 103 g (with event cable)
Hardware
I / O
(Variable options available) 1 Power / Input (Configurable)
1 input for panic button, door sensor
1 output for vehicle lock, open drain, siren
1 cable, RS232, ADC, external power (optional)
LED indicator network, GPS
Internal antenna
Accelerometer Integrated 3-axis accelerometer
Battery power
Rechargeable backup battery 3.7V, 220mAh (Li-ion)
Power supply DC 8 ~ 33 V
Power consumption Active mode: 70 ~ 80mA @ 12V
Sleep mode: Approx. 4 mA at 12 V
Deep sleep mode: Approx. 2 mA at 12 V
Environmental
More information about this source textFor more information about the translation, the source text is needed
ES
PT
